Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
METHODS OF MEASUREMENT
With double-mass flywheels that come with an even number
of bolts at the clutch pressure plate, apply the lever at the
center and measure the clearance by using the torque setting
angular gauge. This method works with most double-mass
flywheels and should be preferred.
With double-mass flywheels that come with an odd number
of bolts at the clutch pressure plate, don't apply the lever at
the center and measure the clearance by counting the teeth
on the cranking ring.
7 Tool
A Sheet between gearbox and engine
B Flywheel gear rim for starter
C Dual-Mass flywheel (friction surface)
MEASURING THE CLEARANCE BY USING ANGULAR DIAL INDICATOR
1. Install two suitable mounting bolts (6) opposite each other
in the threads for the clutch pressure plate.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
