Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Flywheel locking tools
2
Angular dial indicator (tilting tolerance measurement)
3
Locking tool for angular dial indicator
4
Dial indicator (clearance measurement)
5
Dial indicator arm
6
Mounting bolts / plug gauge
7
Lever
8
Holder for dial indicator arm or angular dial indicator locking tool
9
Distance sleeve
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This tool kit is suitable for testing clearance angles and tilting tolerances on double-mass flywheels.
Procedures that are necessary whenever you want to replace a clutch because a worn out or
damaged double-mass flywheel will damage the replaced clutch and/or other engine parts. After
disassembling the clutch disc, testing will be possible on built-in clutches.
SAFETY INFORMATIONS
•
Keep children and other persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Be careful when working on hot engines because of the risk of burn injuries!.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Testing Tool
for Dual-Mass Flywheel
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8681
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
