Publicidad
Idiomas disponibles
Idiomas disponibles
Threading the machine
注意
CAUTION:
意
Thread
take-up
❼
❻
❽
8
❺
Turn OFF the power switch when threading or passing thread.
* To pass the thread though thread tension dial ❸ , firstly raise the press-
er foot lifting lever and provide a space between the tension disks.
* Bring the thread take-up ❼ to the upper end of its stroke. Then, pass
the thread through it.
1
Pass the thread
❶
through the thread
guide ❶ .
When using a thread
such as nylon thread
which easily slips out of
the thread path, thread
the machine head as
illustrated in the circled
figure.
2
Thread the machine
head in numerical
order, ❷ to ❽ .
❷
❹
❸
Sub-tension knob
・ Pass the thread through the
space between the two ten-
sion disks.
・ The standard thread tension
is achieved when the end
face of the screw at the cen-
ter of the knob is flush with
the end face of the knob.
Pass the thread through
the clearance between the
Thread tension
two thread tension disks.
disk
3
Pass the thread
through the thread
guides ❾ and .
15
Publicidad
