Publicidad
Idiomas disponibles
Idiomas disponibles
Built to Exceed
3
YEARS
L I M I T E D WA R R A N T Y
Power Tool Safety Rules
! WARNING ¡
Read and understand all instructions. Failure to follow all instructions listed below, may result
in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area clean and well lit.Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases, or dust+.Power tools create sparks which may ignite the dust or fumes.
Keep by-standers, children, and visitors away while operating a power tool. Distractions can
cause you to lose control
Electrical Safety
Before plugging in the tool, be certain the outlet voltage supplied is within the voltage marked
on the nameplate. Do not use "AC only" rated tools with a DC power supply.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded. If operating the power tool
in damp locations is unavoidable, a Ground Fault Circuit Interrupter must be used to supply
the power to your tool. Electrician's rubber gloves and footwear will further enhance your per-
sonal safety.
Don't expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immedia-
tely. Damaged cords increase the risk of electric shock.
2
www.siefkentools.com
Publicidad
