Publicidad
Idiomas disponibles
Idiomas disponibles
Drill Bit Assemble And Remove:
1． Disconnect tool from power source and turn o the switch before assembling or removing
drill bit
2. key chuck: insert drill bits to the button of chuck, tight chuck by hand. Insert key into 3 holes
on chuck and tight rmly clockwise. 3 holes must be tighten.
3． Loose chuck by key anticlockwise to take drill bit out.
Picture 3
1. Key for chuck
Model Selection:
Picture 4 - Picture 5
1. Change Button Frame
2. Change Button
1． The impact drill have 2 models: impact drill and drill.
2． When you want to drill with impact, on wall, brick, tile, choose model "impact drill" (as Picture
4 shows).
3． When you want to drill without impact, on wood, metal, choose model "drill"(as Picture 5
shows).
www.siefkentools.com
Built to Exceed
3
YEARS
L I M I T E D WA R R A N T Y
8
Publicidad
