Witt ETNA Rotante Instrucciones página 15

USE OF THE PIZZA OVEN / IGNITION GUIDE
When the regulator is properly connected, the gas can be turned on.
ETNA FERMO - single burner
To ignite the burner: depress and turn the on/off button slowly counter-clockwise until
you hear a click and the burner ignites. This will take about 8-0 seconds, as the gas
has to travel through the burner pipe to the oven. Keep holding the on/off button in
for 10 seconds after ignition and then release the button. Set the burner as desired. If
the burner does not turn on, leave the button in the OFF position and wait five minutes
before trying again.
ETNA ROTANTE - two burners
To ignite the burner: depress and turn the on/off button slowly counter-clockwise until
you hear a click and the burner ignites. This will take about 8-10 seconds, as the gas
has to travel through the burner pipe to the oven. Keep holding the on/off button in for
10 seconds after ignition and then release the button. Set the burner as desired. Press
the middle button to set the pizza stone rotating. If the burner does not turn on, leave
the button in the OFF position and wait five minutes before trying again.
WARNING: Do not leave the rotation button activated for an extended period of
time without the turntable running, as this may cause damage to the pizza stone.
Symbol Description
Main burner
Boost
burner
Turntable
rotation
EN EN
15