Witt ETNA Rotante Instrucciones página 16

Exterior:
• Make sure the pizza oven has cooled down and is safe to touch before cleaning
the outside.
• Painted parts as well as plastic surfaces can be cleaned with mild soapy water
and a clean cloth (do not use scouring or grease removal products or scouring
pad).
• It is recommended to first test the detergent on a smaller area of the appliance.
NEVER use paint diluters or similar solvents and NEVER pour cold water over
warm surfaces.
• Wipe with a cloth.
Inside:
• Make sure the pizza oven has cooled down and is safe to touch before cleaning
the inside.
• The pizza oven can be cleaned inside with a little mild soapy water and a soft
cloth or sponge.
• To clean any stubborn dirt or grease, use a little baking soda on a wet sponge.
Do not use scouring agents.
Pizza Stone:
• The pizza stone is intended exclusively for use in the Witt pizza oven, it is not
intended for use over an open fire.
• The pizza stone should only be cleaned with water. Soap will leave soap
residue in the joints of the stone.
• The pizza stone is fragile and can break if it is knocked or dropped.
• The pizza stone gets very hot during use and stays warm for a long time after
use.
• NEVER cool the stone down with water when the stone is hot as it can crack
and break.
• After cleaning the stone with water, allow it to dry thoroughly before use.
16
CLEANING AND MAINTENANCE