SERVICING
CLEANING THE WELL, BASKET SUPPORT AND ACCESSORIES
To carry out this operation, proceed as follows.
Switch the appliance off and leave it to cool.
)
Turn off the circuitbreaker to disconnect it
)
from the electrical mains.
Drain and fi lter the oil (see page 18).
)
Remove and clean the baskets and the bas-
)
ket support structure (A).
AUse the lever (B) to swing the heating ele-
)
ments (C) into the vertical position.
Apply a food-grade detergent to the inside
)
of the well.
Rinse the well with drinking water and drain.
)
A
3395260_ut_GB_rev.1
Apply a specifi c product or a water and vin-
)
egar solution to the well to remove the deter-
gent residues.
Rinse, empty and dry the well.
)
After use, clean the accessories with a suit-
)
able grease-remover product. If possible,
wash in the dishwasher.
ATTENTION: When using water for
routine cleaning, check for traces of water
left in the well, on the accessories and in the
drain line before refi lling with oil.
C
B
ENGLISH
21