Specifications - OHAUS MB35 Manual De Instrucciones

EN-20

5.4 Specifications

MODEL MB35
Capacity
Readability
Temp. Settings
Drying Programs
Switch-off Criteria
Heat Source
Calibration
Dimensions (DxWxH) (cm)
Pan Size
Weight (kg)
Shipping Weight (kg)
Admissible ambient conditions
Temperature range:
Atmospheric humidity:
Warm-up time:
Voltage fluctuations:
Installation category:
Pollution degree:
Power load:
Current consumption:
Power supply voltage:
Power line fuse:
35g
0.001g, 0.01%
50°C to 160°C (5° increments)
Standard
Timed, Auto
Halogen
External calibration mass-20g
35.5 x 19 x 15.2
90 mm. diameter
4.5
6.4
Use only in closed rooms
5 ºC to 40 ºC
Maximum relative humidity 80% for temperatures up to 31 °C decreasing
linearly to 50% relative humidity at 40 °C.
At least 60 minutes after connecting the instrument to the power supply;
when switched on from standby-mode, the instrument is ready for
operation immediately.
–15% +10%
II
2
Max. 450 W during drying process
4 A or 2 A, according to the heating element
100 V – 120 V or 200 V – 240 V, 50/60 Hz
(the voltage is given by the heating element)
1 piece, 5 x 20 mm, T6,3 H 250 V
MB35