Smart Sensor Care; Cleaning The Dust Sensor - Winix HR950 Manual De Usuario

SMART SENSOR CARE

After replacing the filters, power on the
④
unit. Once the unit running, press and
hold the RESET button for 5 seconds.

4. Cleaning the Dust Sensor

For optimal performance of the Dust Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit
is running in a place with high dust levels.
Open the Dust Sensor cover.
①
Use a damp cotton swab to wipe the
②
lens and intake area of the Dust Sensor.
To clean the sensor area, use only water. Do
x
not use volatile substances such as alcohol
or acetone.
Wipe away any remaining moisture with
③
a dry cotton swab.
English
Care and Maintenance
Lens
Cotton
swab
HR 950, HR 951
5 seconds
17