Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 25 Tuesday, December 20, 2022 10:47 AM
5
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Wi-Fi
The Wi-Fi button is used to connect the appliance
to a home Wi-Fi network.
Model LSGL5833*, LSGL583CF
1
Set the mode knob to the OFF position.
2
Press and hold Timer On/Off for 3 seconds.
3
Follow the instructions in the LG ThinQ app to
connect the appliance.
Model LSGL5831*
1
Press and hold Remote Start for 3 seconds.
2
Follow the instructions in the LG ThinQ app to
connect the appliance.
NOTE
• See the Smart Functions section in the owner's
manual for more details.
Settings
Model LSGL5833*, LSGL583CF
Set the oven mode knob to the Off position. Press
and hold Start Time for 3 seconds. Then press the
Start Time key repeatedly to toggle through and
change oven settings.
Model LSGL5831*
Press Settings. Then press the Settings button
repeatedly to toggle through and change oven
settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
(Model LSGL5833*, LSGL583CF)
• adjust the oven thermostat
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
Model LSGL5833*, LSGL583CF
1
Set the oven mode knob to the off position.
Press and hold Start Time for 3 seconds.
2
Press +/- to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Model LSGL5831*
1
Press Settings
2
Press +/- to toggle between a 12-hour and 24-
hour clock.
3
Press START to accept the change.
Setting Convection Auto Conversion
(Model LSGL5833*, LSGL583CF)
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 ℉ /
14 ℃. This auto converted temperature shows on
the display. For example, select Conv. Bake, enter
350 ℉, and 325 ℉ shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1
Set the oven mode knob to the Off position.
2
Press and hold Start Time for 3 seconds.
Then press the Start Time button repeatedly
until Auto appears in the display.
OPERATION
25
Publicidad
