Descargar Imprimir esta página

Medline Hemo-Force MDS600INT2 Instrucciones De Operación página 13

Bomba para tvp intermitente 2nda generación
Ocultar thumbs Ver también para Hemo-Force MDS600INT2:

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Functions
1. Battery Option (Battery sold separately)
i.
This device has a Lithium battery option that can serve
as a backup. The device constantly monitors the outer AC
electric power supply. In the case of a power failure, the
pump will switch to battery operation automatically.
ii.
The "Battery Indicator" indicates the battery
capacity status as illustrated.
iii. Under normal conditions a fully charged battery will last
approximately 4 hours of continuous operation. It may take
up to 16–20 hours to fully charge a depleted battery. When
battery is charging, a battery icon will appear on the LCD
screen, and the power button will illuminate in green.
iv. The pump will show a flashing light from the "Battery Indicator"
and trigger the audio alarm to give a low battery warning
15 minutes before the pump automatically shuts down.
CAUTION: When using a pump with the battery in a normal
situation, if a pump is turned off immediately after losing the AC
power, it might be the battery is out of power or failed. In this
case, connect the pump to the AC power to charge the battery
for 16-20hours. If the pump still cannot be powered on by the
battery, it means that the battery is out of order. Please contact
a qualified and authorized professional to replace the battery.
13

Publicidad

loading