ATTENTION!
♦
This charger can only charge the following bat-
teries: PAP 20 A1 / PAP 20 A2 / PAP 20 A3.
♦
A current list of battery compatibility can be
found at www.lidl.de/Akku.
WARNING!
■
Do not operate the appliance with a dam-
aged cable, power cable or power plug. A
damaged power cable poses a threat of a
fatal electric shock.
Supplementary notes:
■
Do not use any grinding discs.
■
Use only saw blades with diameters corre-
sponding to the label on the saw.
■
Always use the right saw blade for the material
being worked.
■
Use only saw blades with a speed marking
that corresponds to or is higher than the speed
specified for the power tool.
■
Saw blades that are intended for use on wood
or similar materials must comply with EN 847-1.
■
When sawing plastic, avoid melting the plastic.
■
Wear a dust mask when sawing.
■
Only use recommended saw blades.
■
Always wear hearing protection!
Safety information for circular saw
blades
Wear protective gloves!
Wear a dust mask!
Wear protective goggles!
Wear hearing protection!
CAUTION! RISK OF EXPLOSION!
Never charge non-rechargeable
batteries!
│
GB │ MT
■
56
Original accessories/auxiliary
equipment
■
Only use the accessories and additional
equipment which are specified in the operat-
ing instructions and are compatible with the
appliance.
WARNING!
►
Do not use any accessories not recommend-
ed by PARKSIDE. This can lead to electric
shock and fire.
WARNING! Protect yourself from
laser radiation!
LASER
P max.: < 1 mW • λ: 650 nm •
EN 60825-1:2014
Never look directly into the laser beam or the
opening from which it emerges.
WARNING!
►
Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
►
Caution! If operating and adjustment equip-
ment or procedures other than those specified
here are used, this may result in hazardous
radiation exposure.
■
Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
CAUTION!
►
If operating and adjustment equipment is
used or procedures other than those speci-
fied here are carried out, this may result in
hazardous radiation exposure.
2
PHKSA 20-Li A2