Oase BioTec ScreenMatic2 40000 Instrucciones De Uso página 45

ScreenMatic rotating screen unit
1 Control system
2 Operating panel
3 Sensor underneath the control device
 When the sensor comes into contact with the water on the ScreenMatic screen, an automatic
cleaning process is triggered.
4 Stripper
 scrapes the debris from the ScreenMatic screen and conveys it into the debris tray.
5 ScreenMatic screen
6 "Max. water jet" mark
 Debris may be washed out of the debris collection tray if the water jet from the water distributor
exceeds this mark.
7 Transformer
 Voltage supply for the control device and motor
8 Motor
 Drive of the ScreenMatic rotating screen unit
Properties
 High performance flow-through filter for ponds up to 40 m
 Electrically driven ScreenMatic rotating screen for automatic removal of coarse debris.
 Low-maintenance filter due to the automatic removal of coarse debris.
 Bottom dirt outlet with slide valve for removal of dirt/debris from the filter system.
 Convenient cleaning of the foam filters directly inside the filter.
 Foam cleaning device and holder for fastening the foam cleaning device to the container.
 Perfectly tailored to the OASE AquaMax Eco filter pumps.
 Direct connection of the OASE UVC clarifiers of the Vitronic 18W/24W/36W, Bitron C and
Bitron Eco series possible.
 Use of different filter media to ensure optimum colonisation of bacteria for biological filtra-
tion.
, 60 m , 90 m or 140 m
3 3 3 3
EN
BTC0056
.
45