Oase BioTec ScreenMatic2 40000 Instrucciones De Uso página 67

Cleaning/replacing the substrate tubes
The substrate tubes are filled with zeolite on delivery. OASE recommends replacing the zeolite
with Phosless when the bacteria are established and the foam filters are fully effective.
Prerequisite:
 The filter pump is switched off.
 The container is open. (→ Remove the container cover)
 The screen holder is hinged up. (→ Hinging the screen holder up/down)
BioTec ScreenMatic
How to proceed:
1. Remove the separating plate.
2. Remove the substrate tubes and clean them or replace their contents.
– BioTec ScreenMatic
– BioTec ScreenMatic
– When inserting, push the substrate tubes against the wall opposite to the outlet.
40000, 60000
2
40000: Two substrate tubes
2
60000: Three substrate tubes
2
EN
BTC0055
67