Bunn DUAL & SINGLE SH DBC Manual De Capacitación Técnica página 253

ITEM PART NO.
1 23717.0003
00908.0000
2 02536.0000
3 20936.1000
4 01501.0000
5 20203.0100
6 00908.0000
7 12524.1000
20922.1000
12322.1000
12305.1000
12451.1000
00908.0000
8 12398.0002
9 26622.0001
10 27473.0000
11 03803.0000
03803.0002
00946.0000
12 03633.0000
13 - - - - - - - -
14 03807.0000
15 22728.0000
41259.1003
00971.0000
16 12422.0000
17 03236.0007*
18 04797.0000
19 00946.0000
20 41280.0001
21 41266.0000
22 02434.0013*
23 20541.0001
24 12565.0011
12565.0013
02328.0003
01520.0000
25 M2522.1000
26 21801.0002
27 03236.1001
03236.1003
03236.1002
28 02434.1000
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
TANK HEATER & OVERFLOW PROTECTION DEVICES
QTY. DESCRIPTION
1 Thermostat, Limit
2 Nut, Hex #8 - 32
4 Grommet, Probe (1 less used on brewers with Copper Overflow Cup)
1 Probe Kit (Includes items 4, 5 & 6)
1 Washer .164" I.D. x .375" O.D.
1 Lockwasher, Internal Tooth #8
1 Nut, Hex #8 - 32
1 Tank Heater 1800W @ 120V (Includes item 8)
1 Tank Heater 3000W @ 240V (Includes item 8)
1 Tank Heater 4000W @ 240V (Includes item 8)
1 Tank Heater 4000W @ 208V (Includes item 8)
1 Tank Heater 5000W @ 240V (Includes item 8)
4 Nut, Hex #8 - 32
1 Gasket, Tank Heater
1 Tube Assy, Vent
1 Bracket, Vent Tube
1 Switch Assy, Liquid Level, 120V,120/240V & 200V (Includes items 12, 13 & 14)
1 Switch Assy, Liquid Level, 230V (Includes items 12, 13 & 14)
1 Nut, Hex .125" FPT
2 Gasket, Float Switch (Only 1 used in this application)
3 Washer, Adjusting (DO NOT USE IN THIS APPLICATION)
1 Clip, Spring
1 Overflow Cup Assy Copper (Second type) (Also replaces aluminum cup)
1 Kit, Overflow Cup (Aluminum) (Includes items 2,18, 20 & 21)
2 Nut, Keps #10-32
2 Clamp, Hose .47"/.54" I.D.
1 Tube, Silicone .312" I.D. x 29" (Order item 27)
1 Washer, Celcon .520" I.D. x 1.0" O.D.
1 Nut, Hex .125" FPT
1 Elbow,.375" Multi Barb
1 Film, Insulating
1 U-Channel 1.0" (Order item 28)
1 Heat Sink, Aluminum
1 Triac Assy, 40 Amp (120V, 120/240V, 200V & 230V models)
1 Triac Assy, 40 Amp (Early 230V Brewers with Thermal Fuzes)
1 Screw, Pan Head #6-32 x .312"
1 Lockwasher #6
- Heat Sink Compound (Not Illustrated)
1 Tube .375" O.D. x 1.50" LG
- Tube, Silicone .312" I.D. x 36.0"
- Tube, Silicone .312" I.D. x 60.0"
- Tube, Silicone .312" I.D. x 120"
- U-Channel 18.0" (Use as required)
Not illustrated
9
34024.3 072512