Bunn DUAL & SINGLE SH DBC Manual De Capacitación Técnica página 66

ITEM PART NO.
1 02536.0000
2 20937.0004
3 32359.0000
4 12418.0001
5 12422.0001
6 20976.0036*
7 36233.1005
36233.1006
32283.0000
8 20976.0017*
9 36378.0001
40071.0001
10 41640.0000
11 37297.1001
37297.0004
12 20976.1000
20976.1001
20976.1002
* Indicates the part number listed is for reference only. See DESCRIPTION for possible service replacement.
INLET VALVE AND LINE
QTY. DESCRIPTION
1 Grommet .375" I.D.
1 Tube, Tank Fill
1 Gasket, .375" Flare Copper
1 Fitting, Swivel .375" Barb
2 Clamp, Hose .59"/.66" I.D
1 Tube, Silicone .375" I.D. x .625" O.D. x 36.0" (Order item 12)
1 Valve, Water Inlet 120V
1 Valve, Water Inlet 230V
2 Screw, Pan Head M4 x 6MM
1 Tube .375" ID x .625" OD x 2.0" (Order item 12) (230V Models)
1 Check Valve (Installed in item 6) (208V, 240V, 120/208V, 120/240V Models)
1 Check Valve, .38" Barb (230V Models)
1 Gasket, .75" Hose Fitting
1 Elbow, .375" FLR x .75" FTHR
1 Elbow, .375" Compression x .75" FTHR
- Tube .375" ID x .625" OD x 12.0" (Use as required)
- Tube .375" ID x .625" OD x 36.0" (Use as required)
- Tube .375" ID x .625" OD x 120.0" (Use as required)
17 35060 021412