Descargar Imprimir esta página

AEG BSE576321M Manual De Instrucciones página 50

Horno de vapor
Ocultar thumbs Ver también para BSE576321M:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 106
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.
The Food Sensor does
not operate.
The door gasket is dam‐
aged.
The display shows
"12.00".
There is water in the oven
cavity.
- indicator is off.
- indicator is on.
50
ENGLISH
Check if...
The fuse is blown.
The plug of the Food
Sensor is fully inserted in‐
to the socket.
Do not use the oven.
Contact an Authorised
Service Centre.
There was a power cut.
Set the time of day.
There is not too much
water in the tank.
There is enough water in
the water tank. If water
starts to leak in the oven,
and the indicator is still off
contact an Authorised
Service Centre.
There is enough water in
the tank. If the tank is full
and the indicator is still on
contact an Authorised
Service Centre.
Problem
The steam cooking does
not work.
The steam cooking does
not work.
It takes more than three
minutes to empty the wa‐
ter tank or the water leaks
from the steam inlet
opening.
The lamp does not work.
13.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Check if...
There is no lime residue
in the steam inlet open‐
ing.
There is water in the wa‐
ter tank.
There is no lime residue
in the steam inlet open‐
ing. Clean the water tank.
The lamp is burnt out.
.........................................
.........................................
.........................................

Publicidad

loading