Operating Guidance; Measuring Guidance - KPS MT40 Manual De Funcionamiento

KPS-MT40 • Digital multimeter
Positive input end of voltage, resistance, frequency, diode,
V, Ω, Hz,
buzzer measurement and (connected with the red test
TEMP
probe).
Positive input end of current mA, temperature and triode
hFE (connected with output socket of black test probe or
mA,
dedicated multifunction test socket).
10A Positive input end of 10A (connected with the red test probe).
2.4 Accessories
Operation Manual
Test probe
Dedicated multifunction test socket MS3204
3.

OPERATING GUIDANCE

3.1 General operationl
3.1.1 Reading maintenance mode
3.1.1 Reading maintenance mode
In reading maintenance mode, the current readings will be kept on the display.
Change the measurement function grade, or press HOLD key to exit reading
maintenance mode.Para entrar y salir del modo de retención de la lectura:
1 Press "HOLD" key, the reading will be maintained and "H"symbol will dis-
play on LCD display simultaneously. Press "HOLD" key again to return the
meter to normal measurement state.
3.1.2 Battery saving energy function
The meter power will disconnect automatically after about 40 minutes, to save
battery power.

3.2 Measuring guidance

3.2.1 Measuring AC and DC voltage
Voltage is the potential difference between two points. AC voltage polarity
changes over time, while DC voltage polarity does not change over time.
DC voltage measuring range of this meter: 200.0mV, 2.000V, 20.00V, 200.0V
29
1 pc
1 pc
1 MS3204