Oil Level Checking; Engine Oil Replenishing - TOHATSU MFS 25C Manual Del Propietário

62
INSPECTION AND MAINTENANCE
Item
Steering
Devices
Other parts
ENOM00081-A

Oil level checking

If the oil level is low, or too high, the life
of the engine will be shortened signifi-
cantly.
1. Stop the engine and set it in a verti-
cal position.
2. Remove the top cowl.
3. Remove the dipstick after 5 minutes
engine has stopped.
4. Wipe oil off the oil dipstick with a
clean rag.
5. Put in the dipstick.
6. Take out the dipstick and check the
oil level.
7. Return the dipstick.
1
10
1. Filler cap
2. Dipstick
Points to Check
• Check the operation of the steering handle.
• Check if the anode is securely installed.
• Check the anode for corrosion and deformation.
ENOF01121-0
1. Upper level 1800 mL
2. Lower level 1600 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
2
engine oil is milky color, or appears con-
taminated.
ENOM00082-A

Engine oil replenishing

ENOW00079-A
Do not add engine oil of brand and grade
other than existing one. In case engine oil
of other brand or grade is added, drain all
oil and ask dealer for treatment.
In case other than engine oil such as gas-
oline is put in the oil chamber, empty the
chamber and ask dealer for treatment.
When replenishing engine oil, be careful
not to allow entry of foreign matters such
as dust and water into oil chamber.
Remedy
Repair
Repair if necessary
Replace
1
2 ENOF00081-0
CAUTION