Maxeon SunPower Reserve Instrucciones De Instalación página 8

2.0 Safety
2.1. Intended Use
Product(s)
SunPower Reserve system
including:
•
RESERVE-INV-1-P5-L1-
INT
• RESERVE-BAT-1-DC-10.1-
INT
•
Current transformers or
electricity meters
INVERTER:
RESERVE-INV-1-P5-L1-INT
BATTERY:
RESERVE-BAT-1-DC-10.1-INT
2.2. Safety Instructions for Battery
2.2.1 General Safety Precautions
1. Overvoltage or wrong wiring can damage the battery pack and cause deflagration, which
can be extremely dangerous.
2. All types of breakdown of the battery may lead to a leakage of electrolyte or flammable
gas.
3. Battery pack is not user-serviceable. There is a high voltage in the device.
4. Read the label with Warning Symbols and Precautions, which is on the right side of the bat-
tery pack.
© 2023 Maxeon Solar Technologies, Ltd. All rights reserved. | 547143 Revision B - June 2023
Specifications included in this document are subject to change without notice
Intended use & installation requirements
The SunPower Reserve system is intended for installation in
residential homes to optimise self-consumption.
It is suitable for indoor and outdoor installation.
All components must operate in a scenario suitable for
their operation. Any use of the product(s) other than that
described in this section does not qualify as appropriate. Be
sure to use this product in accordance with the information
provided in the accompanying documents and in
accordance with local applicable standards and directives.
Any other operation may cause personal injury or property
damage. Alterations to the product, e.g. changes or
modifications, are only permitted with the express written
permission of Maxeon Solar Technologies.
Unauthorized alterations will void guarantee and warranty
claims. Maxeon Solar Technologies shall not be held liable
for any damage caused by such changes.
The type label must remain permanently attached to the
product.
This document is an integral part of this product. Ensure
it is accessible for future reference and comply with all
instructions contained therein.
The inverter is used for bidirectional transfer between AC
current and DC current.
It must only be operated with PV arrays of protection class
II in accordance with IEC 61730, application class A. The PV
modules coupling capacitance must not exceed 1.0 μF.
The battery pack must only be used for energy storage with
a SunPower Reserve inverter.
7