True Spec Serie Manual De Instalación página 22

Maintenance & Servicing
Maintenance & Servicing
• Only qualified technicians
service the appliance. For assistance finding
a qualified technician, please visit our Service
Company Locator at:
truemfg.com/support/service-locator/.
• Turn off and lockout all utilities
water) according to approved practices during
maintenance or servicing.
The appliance owner is responsible
a Personal Protective Equipment (PPE) Hazard
Assessment and ensuring adequate protection during
maintenance and cleaning procedures.
Use appropriate tools, safety equipment, and PPE
during installation and servicing.
Sharp Edges!
• Take care when moving, installing, cleaning,
servicing, and maintaining the ice machine to avoid
cuts. Be sure to take care when reaching under the
ice machine or handling metal components.
• Stay clear of pinch point areas, such as the space
between appliance doors and surrounding
cabinetry. Take care closing doors with children
nearby.
Page 22 of 240
WARNING!
should install and
(gas, electric,
for performing
QUICK START MANUAL
Risk of electric shock or burn!
• Powering off an electronic control or setting
•
Flammable refrigerant/insulation used!
licensed service provider service your appliance to
minimize the risk of possible ignition due to incorrect
parts or improper service and to ensure the operator's
health and safety.
Crush or cut hazard!
installing, moving, or servicing the appliance.
Slippery Surfaces!
can create slippery surfaces near the appliance. It is
your duty to immediately warn your customers of, and
dry, the slippery surface. All wet floor areas must be
marked with a wet floor sign.
08/3/2023
WARNING!
temperature controls to the 0 (off) position
NOT remove power from all components. Unplug
the appliance or turn off the power supply before
installation or servicing.
DO NOT clean appliance with a pressure washer or
hose.
Keep clear when uncrating,
Moisture from improper drainage
P#844594
truemfg.com
DOES
Have a
TEC_TM_169 | REV. B | ALL