Corghi EM 9250 CompactLine Manual De Uso página 143

- This message indicates that the machine is set for acquiring the P1 posi-
in -1-
tion behind the first spoke
- This message indicates that the machine is set for acquiring the P2 posi-
in -2-
tion behind the second spoke.
- This message is displayed for approx. 3 seconds if the selected angle is
no -2-
greater than 120 degrees, indicating that the procedure must be repeated
correctly.
- This message indicates the reference for acquiring the two points P1 and
P2 behind the spokes. Depending on the configuration performed by
in H.X
the operator, the message on the display can be H3, H6 or H12. If the
laser indicator is enabled, the reference will be 6 o'clock (H.6).
CAL GO
- Calibration spin.
- This message indicates the correct position for applying the calibration
I - - CAL
weight in the unbalance calibration programme at the end of the first
spin.
- This message indicates the correct position for applying the calibration
-- I CAL
weight in the unbalance calibration programme at the end of the second
spin.
End CAL
- This message indicates the end of the unbalance calibration programme.
GO ALU
- Spin with ALU programme selected.
GO d15
- Spin with Motorcycle Dynamic programme selected.
GO A15
- Spin with Motorcycle ALU programme selected.
- Spin with Static programme selected (car/motorcycle environment) or
St
when the Static balancing programme is selected in the vehicle working
environment.
- This message indicates the selection of the Static balancing programme
St biE
in the motorcycle working environment.
- This message indicates the selection of the dynamic balancing programme
dyn biE
in the motorcycle working environment.
- This message indicates the selection of the ALU balancing programme
ALU biE
in the motorcycle working environment.
ccc ccc
- Unbalance values greater than 999 grams.
- This message indicates the Inner Plane for applying the adhesive weight
--- A-1
in the ALU1P balancing programme
- This message indicates the External Plane for applying the adhesive
A-2 ---
weight in the ALU1P/ALU2P balancing programme
EM 9250 - EM 9250 C CompactLine Operator's manual
UK
143