Adapter Nut 1 687 345 070; Maintenance; Spare And Wearing Parts; Disposal - Bosch 1 687 010 209 Manual Original

---
3.4

Adapter nut 1 687 345 070

The adapter nut (1) can be used to attach injectors
with connection threads M16 x 1.5 (2) to the high-pres‐
sure rail (3). How to replace the adapter nut is descri‐
bed in the DCI 200 Help Center.
2
(1) Adapter nut M16 x 1.5
(2) Injector
(3) High-pressure rail
---
4.

Maintenance

--- 4.1

Spare and wearing parts

Denomination
1x connection adapter Ax1
12x O-ring 18.4 x 2.7 mm for connection
<)
adapter
1x adapter cable for Bosch CRINs 4.2
<)
1x hose assembly
<)
2x adapter nut M16 x 1.5
1x Parts set with 2 terminals
1x flow meter
1x inlet filter
<)
2x O-ring
<)
Wearing part
---
Robert Bosch GmbH
5.
---Separator--- 5.1
---Separator---
1. Dismantle the 1 687 010 209, and sort by materials.
2. Use the disposal and collection systems available in
1
---Separator---
5.2
3
 Substances hazardous to water must be disposed of
---
Order number
1 685 720 379
1 680 210 146
<) 1 684 465 867
1 680 712 396
1 683 345 070
1 687 016 235
1 687 224 309
1 687 434 081
1 680 210 539

Disposal

Re-use and disposal of the
1 687 010 209
The 1 687 010 209, accessories and packag‐
ing must be recycled in an environmentally
friendly manner.
your country.

Substances hazardous to water

in accordance with the applicable regulations.
Oil, grease and refuse containing oil or grease
(e.g. filters) are hazardous to water and the envi‐
ronment. Substances hazardous to water must
not be allowed to enter the sewage system.
Test oil conforming to ISO 4113 is classified un‐
der waste oil collection category 1. Collection
category 1 waste oil must not contain any foreign
substances, e.g. waste oils belonging to another
category, or gasoline or diesel. See the test oil
safety data sheet for the correct waste code
number.
1 687 010 209 | 11 | en
1 689 989 560 | 2023-07-08