Grammer ROADTIGER COMFORT Manual Del Usuario página 24

Safety Instructions
Conversion or retrofitting work on seats of GRAMMER AG must only be carried out by

authorised expert workshops, trained personnel, or appropriately educated persons,
taking into account the applicable operating, maintenance and installation instructions and
the country-specific requirements.
Incorrect installation poses the risk of injury and property damage; the function of the

seat or the attached parts cannot be guaranteed.
Before driving, ensure the safe operation of the vehicle with all selected seat

adjustments.
Connection details
If electrical connections to the on-board power supply are required, please observe the

following information:
Before connecting an electrical consumer in the driver seat (e.g. seat heating or air
conditioning), the relevant electrical data regarding the voltage, fuse and type of
connection in the vehicle must be requested from the vehicle manufacturer,
GRAMMER AG or its representative.
For safety reasons, the connection to the on-board power supply must be performed by
authorised, expert personnel.
The seat connections must be fused separately from other vehicle components.
Seat and backrest
DC
heating *
24V 2.0 A; 48 W (level 1)
4.0 A; 96 W (level 2)
When establishing the electrical connection, select a circuit in which the electrical
consumers on the driver seat will be disconnected from the power supply when the
ignition is switched off.
Warranty and liability
GRAMMER AG accepts no warranty claims or liability for damage resulting from improper

installation, use or repair.
Details of warranty claims granted by GRAMMER AG can be found in your contractual

documentation (see invoice or delivery note). Claims other than those described there
cannot be asserted against GRAMMER AG.
*if present
24
Seat air
conditioning *
0.8 A; 19 W
GB