Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE
When decommissioning the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: Electric power
Hazard
Risk of electric shock
caused by live com-
ponents
► Source of hazard: Handling of heavy loads
Hazard
Risk of injury due to
body overload
► Source of hazard: Risk generated by materials/substances
Hazard
Concentration
of
unburned gas emis-
sions due to an in-
correct
appliance
decommissioning
10
DECOMMISSIONING
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
When the appliance moves • Use a suitable lifting device
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
• observe the limit values for
lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
SAFETY
Safety device
• Protec tion
panels
• S y s t e m
switch-dis-
connector
Safety device
None
Safety
device
None
3378610_ut_GB
Publicidad
