Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
CLEANING THE GRID, GUARD FRAME AND WELL
IMPORTANT: Clean the grid appro-
priately, using the optional equipment
available.
IMPORTANT: When cleaning, use
only food-approved detergents.
To carry out this operation, proceed as follows.
Turn off the equipment and allow it to cool.
1)
Turn off the switch-disconnector to cut off
2)
the general power supply.
Remove the splash guard frame (A) and clean
3)
it.
Remove the grid (B).
4)
Use the brush (C) provided to remove cook-
5)
ing residues from the grid.
Spread a suitable degreaser on the grid and
6)
leave it for a few minutes.
Clean the grid thoroughly with a sponge,
7)
rinse with plenty of water and dry.
Use the handle (D) to lift the resistances to
8)
access the well.
Ensure that the heating elements are secured
9)
to the pin (E).
Apply a food-grade detergent to the inside
10)
of the well.
Rinse the well with drinking water and
11)
drain.
Restore the initial conditions after complet-
12)
ing the operation.
20
B
C
D
SERVICING
A
E
3378610_ut_GB
Publicidad
