LaCimbali M26 Uso E Instalacion página 58

only DT version with display
AUTOMATIC SWITCH OFF / SWITCH ON AUTOMATIC SWITCH OFF / SWITCH ON
programmed times. Consult the "Service time menu"
chapter to set the "ON Time" switch-on time and the "OFF
Time
When a service time is set, the machine automatically
display:
20 September
wednesday
MACHINE OFF
Note. When the machine is working in the automatic
the machine will not be able to switch on again
automatically.
The machine switches on automatically at the programmed
timed. The messages displayed and the operations
performed by the machine are the same as those described
in the paragraph "MANUAL POWERING".
ENERGY SAVING STANDBY ENERGY SAVING STANDBY
ENERGY SAVING mode.
When this function is enabled, the machine resistance is
not completely disabled and keeps the boiler pressure at
0.2 bar.
for 24 hours, and returns to maintaining 0.2 bar
pressure in the boiler at the end of the closed day.
Please consult the chapter "Service time menu" for setting
this function.
02_M26_UNICO_EU_2314.indd 12 02_M26_UNICO_EU_2314.indd 12
2017
15:18:12
ENERGY SAVING MODE ENERGY SAVING MODE
The ENERGY SAVING function can also be enabled
manually if you press the key and hold it for several
seconds
During this phase:
- If the boiler pressure is set at a value exceeding 1.2
- If the boiler pressure is set at a value below 1.2 bar, the
Press any dispensing key to exit the ENERGY SAVING
mode and return to the machine work phase.
FORCED SWITCH ON FORCED SWITCH ON
Press any dispensing key to force the machine on again.
Note. Forcing the machine on does not change the
Note. At this point the machine will remain on until
12 EN
ON
1
.
pressure is lowered by 0.4 bar below the set value.
1).
07/04/2023 12:05:00 07/04/2023 12:05:00