LaCimbali M26 Uso E Instalacion página 79

25. Programming measures using the "SELF-LEARNING" function
also be programmed using the "SELF-LEARNING" function.
CUSTOMER PROG.
KEY MENU
SELF-LEARNING
WASHING
DATA MENU
CUSTOMER
to the unit.
nozzles and press the button to be programmed. Keep
the button pressed until the desired level is reached in
the cup or cups.
During this phase, the value of the pulses of the
volumetric dispensing device (at the top right of the
display) increases. On releasing the button, the
value reached is stored and appears under the key
programmed.
the steps starting with number 1.
the key.
26. Washing
Press the key and use the
will appear on the display:
CUSTOMER PROG.
KEY MENU
SELF-LEARNING
WASHING
DATA MENU
CUSTOMER
02_M26_UNICO_EU_2314.indd 33 02_M26_UNICO_EU_2314.indd 33
key or exit the menu, leaving the data unchanged, by pressing
and keys to position the
33 EN
Use the and keys to position the cursor (black line)
on the desired line and then press the
The following message will appear on the display:
SELF-LEARNING
Group 1
STOP
090 150
Hot water doses
1 -Press the button to be programmed. Keep the button
pressed until the desired level is reached in the cup.
During this phase, the time in seconds (at the top right
of the display) increases. On releasing the button, the
value reached is stored and appears under the key
programmed.
SELF-LEARNING
water button
2 - Continue to program all the water buttons, repeating
the steps starting with number 1.
Please consult the chapter "Cleaning and maintenance"
for this function.
key.
DV: 000
080 160
t: 3.5
3.5
07/04/2023 12:06:00 07/04/2023 12:06:00