Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION OF YOUR UNIT
Place your unit on a floor that is strong enough to support the unit when it is fully loaded. To level
your unit, adjust the legs at the bottom of the unit.
Allow 13cm of space between the back and sides of the unit, which allows the proper air circulation
to cool the compressor and condenser.
Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to perform properly.
Avoid locating the unit in moist areas. Too much moisture in the air will cause frost to form quickly
on the interior surface requiring more frequent defrosting of the unit.
Plug the unit into an exclusive properly installed-grounded wall outlet. Under any circumstances, do
not cut or remove the third (ground) prong from the power cord. Any questions concerning power
and/or grounding should be directed toward a certified electrician or an technical assistance.
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
Do not use outdoors or wet surfaces. Use only on dry, indoor surfaces.
Look on your unit and follow all label and marking instructions.
Open the door from the left or right side.
Users can change the direction of opening according to one's own needs.
ELECTRICAL CONNECTION
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by a technical assistance.
This unit should be properly grounded for your safety. The power cord of this unit is equipped with
a plug which mates with standard wall outlets to minimize the possibility of electrical shock. To use
socket. Do not share multi-socket together with other electric appliances. Under any circumstances,
do not cut or remove the third ground prong from the power cord supplied.
Never use an extension cord to connect power to the unit.
Using improper voltage may result in damage to the appliance and possible injury to the user.
Correct voltage is listed on the rating label.
The cord should be secured behind the unit and not left exposed or dangling to prevent accidental
injury.
36
Publicidad
