Publicidad
Idiomas disponibles
Idiomas disponibles
3 YEARS
L I M I T E D WA R R A N T Y
15.The machine is suitable for light grinding of wood and metal.
16.Do not sand the material containing magnesium to avoid re.
17.The plug must be unplugged before any adjustment, repair or maintenance of the machine.
Install or remove sandpaper:
Attention: Please con rm before loading or removing the sandpaper.
The switch has been turned o and the power plug has been unplugged.
After lifting the lever, drive the sandpaper clip to the maximum position.
Insert one end of the sandpaper into the sandpaper clip, so that the edge of the sandpaper and
the bottom.
The sides are relatively uniform and parallel. Bending the sandpaper in advance makes it easy.
When the sandpaper is in place, put the lever down to the original position, Place the sandpaper
holder to tighten the sandpaper.
Repeat the same operation on the other end of the baseplate to keep sand paper under uniform
stress.
Attention: After the sandpaper is inserted, make sure the sandpaper clip is inserted the clamping.
Otherwise, the sandpaper will be loose and easy to slide out. The result is uneven polishing.
5
Publicidad
