4 Assembly
4 Assembly
4.1 First Steps
Follow during every use, especially with hazardous media
> Wear protective clothing, eye protection and appropriate hand protection!
> Never press down the piston when the screw cap is screwed on!
> Avoid splashing the reagent!
> To avoid splashes dispense slowly.
> Liquid may accumulate in the screw cap. Open the screw cap slowly in order to pre-
> Follow all safety instructions and comply with the operating exclusions and limita-
1. Screwing on the dispensing cartridge
a.
2. Installing the actuating unit
a.
56
Operating manual
vent splashing.
tions of use; see Limitations of use and Operating exclusions, p. 51.
WARNING
a.
Screw dispensing cartridge into valve block.
a.
Open piston lock on the actuating unit.
997468