BRAND seripettor Instrucciones De Manejo página 57

b.
c.
3. Installing the filling tube
a. a'.
997468
b.
Put actuating unit over the dispensing cartridge and
screw it down to the valve block.
c.
Depress actuating unit up to the lower stop and keep
holding it using one hand and with the other hand,
close piston locking on the actuating unit.
d.
Release actuating unit and check to see whether the
piston in the dispensing cartridge has moved upward.
Check that the discharge tube is securely seated. Re-tighten
cap nut(s) after two days of use.
a. seripettor®: Cut the filling tube off according to the bot-
tle height and attach it.
a'. seripettor® pro: Adjust the length of the telescopic filling
tube to the bottle height and attach it.
NOTICE
Operating manual
4 Assembly
57