Tabla de contenido
Publicidad
6-65
6-66
138
"BALANCE WITH RUNOUT"
6.4.7
Print Report
The report print out (only possible with the optional
printer) is a summary of technical information.
The information saved during rim or rim and tire
analysis can be printed on paper in a sheet called a
Report.
There are two types of Report, automatically selected
by the machine:
-
Rim diagnostic report
The report print out, after a rim only run, shows the
following information:
(Fig. 6-65)
a)
Dynamic unbalance (right and left). Static
unbalance.
b)
Limits (thresholds) for first harmonic and peak to
peak (radial/lateral) rim runout.
c)
Suggested position for application of weights.
d)
Left bead recess runout peak to peak value.
e)
Graph of left bead recess runout (blue curve).
f)
Graph of left bead recess first harmonic (red
curve).
d1) Right bead recess runout peak to peak value.
e1) Graph of right bead recess runout (blue curve).
f1) Graph of right bead recess first harmonic (red
curve).
g)
Rim lateral runout peak to peak values (left and
right).
h)
Graph of rim left lateral runout (blue curve).
i)
Graph of rim right lateral runout (dashed green
curve).
k)
Rim 12 o'clock position indicator at moment of
printing (green line).
-
Wheel performance report
The report print out, after a complete wheel run,
shows the following information:
(Fig. 6-66)
j)
Rim - tire assembly total runout value.
m) Wheel radial runout threshold value.
n)
Equivalent Static Unbalance, induced by Runout
measured.
o)
Recommended Optima procedure.
o1) Percentage improvement which can be
achieved using recommended Optima
procedure.
p)
Dynamic Unbalance measured (right and left).
q)
Static Unbalance calculated from dynamic
components measured.
r)
Suggested position for application of weights.
Publicidad
Tabla de contenido
