Publicidad
Idiomas disponibles
Idiomas disponibles
Position of
the bushing
and the
insertable
flanges.
6. Turn the front cover of the door 180º so that the hinges are on the opposite side and place in position.
Secure with the 6 "B" bolts and 2 "B1" bolts using the No 3 Allen key. See Fig. 3.
7. Connect the reed sensor to the new cable and replace the filter cover. Replace the top cover removed in
step 1. The process has been completed. See Fig. 4.
Travel of the
cable for the
REED sensor.
Fig. 3
Rear view of the dryer.
fig.4
65
Publicidad
