Primer DSC-11 Manual De Uso Y Mantenimiento página 79

8. ADVANCED USER
The configuration of some of the original dryer parameters can be adjusted in the advanced user
menu. It is also possible to manually adjust the drum rotation speed. The parameters that can be
adjusted in the advanced user menu are as follows:
8.1. Intelligent dry
The intelligent dry system is fitted as standard in the humidity control. Therefore, if the dryer has
humidity control, the appliance runs its drying cycles using the INTELLIGENT DRY system by
default. If the user wishes to use the dryer with the humidity control but without the intelligent dry
system, it is possible to deactivate it.
8.2. PAUSE TIME
The dryer is fitted with drum rotation reversal as standard. It is necessary for the drum to
stop before starting to rotate in the opposite direction. The PAUSE TIME parameter defines the
time that the drum stops for during the drum rotation reversal process. The value is given in
seconds. The default setting of this parameter is 1 second.
8.3. PAUSE TEMP
The PAUSE TIME parameter defined above is only effective when the programmed
temperature is less than a certain value. This value is the PAUSE TEMP value and is given in ºC.
Therefore, when the temperature selected in the corresponding programme is lower than the
value defined in PAUSE TEMP, the drum rotation pauses during the rotation reversal for the time
period defined in the PAUSE TIME parameter. The default setting of this parameter is 40 ºC.
INTELLIGENT DRY
YES / NO
PAUSE TIME
01
PAUSE TEMP
40
79