BRAND Transferpette-8 Instrucciones De Manejo página 62

5 Pipetting programs
a.
3 x
b.
c.
1 x
d.
1 x
e.
1 x
f.
Hold
pressed
62
Operating manual
a.
Call up menu selection: Pressing the menu key three
times takes you to the program selection.
ð
'Mode' flashes.
b.
Set GEL mode: Use one of the arrow keys to scroll
through the modes until 'GEL' appears.
ð
'Mode' continues to flash.
c.
Confirm GEL mode: Press 'Enter' key. The display now
shows 'blo' for blow-out.
d.
Preparing for pipetting: Press the pipetting key once to
move the piston to its start position.
ð
The arrow in the display points upwards (aspiration).
e.
Aspirate liquid: Press the pipetting key once to aspirate
the liquid.
f.
In order aspirate more liquid than set (up to max. 110%
of the nominal volume), keep the pipetting key pressed
during the aspiration process until the desired volume
has been aspirated.
ð
A rhombus appears in the display.
Transferpette® -8/-12 electronic 997200