13. If, for example, the measured value is 601 MΩ with a selected voltage of
1000 V the display will initially remain on during a few seconds, as it is
shown below, informing that test 12 was started.
14. After a few seconds, in the same example, the display will indicate that the
measured resistance value is 601 MΩ, as it is shown:
15. If the measured value exceeds 5000 GΩ @ 5 kV, the following message
will be read:
MegaLogg2 Software
This software makes communication between the equipment and a computer
with Windows operative system easier. It makes it possible to synchronize the
date and time of the equipment internal clock with the computer date and clock,
to transfer the stored date, to clear the memory, to generate tests graphics and
protocols, etc. The installation and operation instructions are included in the
software.
18