MEGABRAS MD-5060x Guia Del Usuario página 6

Keyboard
)- FILTER. It activates the filter that minimizes external noise interference.
*- V-TEST ±500. When activated, it allows to program voltage tests in steps of
500 V. It enables the fast voltage selection keys 3456.
+- VOLTMETER. It triggers the voltmeter function.
,- V-TEST ±100. When activated, it allows to program voltage tests in steps of
100 V. It enables the fast voltage selection keys 3456.
-- BATTERY STATUS. It shows the battery charge status on the display.
.- OP MODE. When activated, it allows to program the Operation Mode (Nor-
mal, SVT or TIMER).
/- MEM. When pressed, the instrument displays the last resistance reading
done.
0- LIM. When activated, it allows to program the limit of the "Pass-Fail test".
1- Turns on / off the printing of the measured values on the PRINTER.
2- START key.
3- Fast selection of 500 V test voltage.
4- Fast selection of 1 kV test voltage.
5- Fast selection of 2,5 kV test voltage.
6- Fast selection of 5 kV test voltage.
7- 8 These keys (Decrease or Increase) allow the selection of the value that is
being programmed, and which is determined by the triggering of one of
these keys: *,.0
8