•
Before to use this instrument the User's guide and Safety warnings must be read and
understood.
•
Safety procedures and rules for working near high voltage energized systems must be
observed during the use of this equipment. The generated voltages may be dangerous.
•
Do not connect or disconnect the test leads during the measurement.
•
Be careful not to make short-circuit between the high voltage terminals and the "+R" or
"Guard" terminals while a measurement is running, because it could be dangerous for
the operator.
•
Be sure that there are not any voltage difference between the points to which the me-
gohmmeter will be connected to, neither between them and ground.
•
The panel, terminals and connectors of the equipment must stay dry and clean.
This equipment should be used only by a trained and competent person,
strictly applying suitable safety rules.
Used symbols
!
Caution, risk of electric shock.
#
Equipment complies with current EU Directives.
"
Safety warnings
4