MEGABRAS MD-5060x Guia Del Usuario página 20

Now the PC is ready to collect the information obtained from measurements. If
START 9 is pressed, the MD-5060x will start sending data to the computer. A
typical line can feature the following format:
Hyper Terminal
X
Printing sample
Paper feed
The (, switch, which is a blue key located in the left upper part of the printer
body, is the Paper feed control. Press this key 3 times after the test is finished
and before cutting the paper, in order to visualize the last lines.
ATTENTION: Don't pull the paper, always use the Paper feed key. Never try to put the
paper back into the printer. In any of these cases, the printer can be easily damaged.
22