Zipper ZI-MD500HST Instrucciones De Servicio página 43

14.8 Air filter
NOTE: Dirty air filters reduce the engine power due to insufficient air flow to the carburetor. Regular
monitoring, especially in dusty atmosphere is therefore essential!
ATTENTION: Never clean the air filter elements with gasoline or flammable solvents: Warning. Fire or
explosion!
Do not run the engine without an air filter: This dust penetrates through the carburetor and causing
premature wear
14.9 Storage
If the machine is stored for longer than 30 days:
• Let the machine cool down.
Clean the machine and dry.
•
Empty Tank and carburetor completely, avoid fuel spillage.
•
Store in a dry, out of reach of children place, well packaged.
•
14.10 Disposal
Observe the national waste disposal regulations. Never dispose of the machine, machine
components or operating equipment in the residual waste. If necessary, contact your local
authorities for information regarding available disposal options.
If you purchase a new machine or equivalent equipment from your specialist dealer, he is
obliged in certain countries to dispose of your old machine properly.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
4. Remove the two M10 nuts and washers
from the side track protection guard. (Pic-
ture 3)
5. Loosen the adjustable bolts and pull the
steering wheel axle toward the engine,
then track will be loosen. (Picture 4)
6. Remove the M10x60 bolt, washers and nut
from the driving wheel. (Picture 5)
7. Pull out the whole track with driving
wheel and assemble the new track. (Pic-
ture 6)
8. In reverse order, repeat the upper steps to
fix the chain and the track protection
wheel guard to finish the track-replacing
work.
MAINTENANCE
43
ZI-MD500HST