Descargar Imprimir esta página

DERKOCH German Line Olpe-N Manual De Instalación Y Funcionamiento página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

Plantillas de Vitrocerámica
Replace the main supply cable following the below instructions:
Switch the appliance off at the
control switch.
Open the terminal block on the
underside of the hob.
Unscrew the terminal screws fixing
the cable.
Connect the "green-yellow" earth
wire to the terminal marked
must be about 10 mm longer than
the live and neutral wires.
Connect the "blue" neutral wire to the terminal marked with letter (N)
Connect the live wire to the terminal marked with letter (L).
IMPORTANT: DO NOT ATTEMPT TO REPAIR THE
Please note that if a technician is called to fix a product under guarantee and
finds that the problem is not the result of an appliance fault, then you may be
liable for the cost of the call-out charge.
The appliance must be accessible for the technician to perform any necessary
repair. If installed in a way that can damage it or the kitchen, the technician
will not repair it.
. It
APPLIANCE YOURSELF.
www.derkochline.com
Ceramic Hob
45

Publicidad

loading

Productos relacionados para DERKOCH German Line Olpe-N