MEGABRAS MD-5060x Manual De Uso página 3

 Before to use this instrument the User guide and Safety warnings must
be read and understood
 Safety procedures and rules for working near high voltage energized
systems must be observed during the use of this equipment. The
generated voltages may be dangerous
Do not connect or disconnect the test leads during the measurement

 Do not touch the test leads before the high voltage indicator turn-off
 Be careful not to make short-circuit between the high voltage terminals
and the "R" or "Guard" terminals while a measurement is running,
because it could be dangerous for the operator
 Be sure that there are not any voltage difference between the points to
which the equipment will be connected to, neither between them and
ground
The panel, terminals and connectors of the equipment must stay dry

and clean
 Use only accessories / replacement parts provided by the manufacturer
This equipment should be used only by a trained and competent
person, strictly applying suitable safety rules.
Safety warnings
4