ViewSonic ViewBoard VS18189 Guia Del Usuario página 3

3. For PC, with the application installed, ViewBoard® Cast
will launch automatically after the ViewBoard® Cast
Button is plugged into the PC.
4. The pairing dialogue box will pop up on your PC. Please
enter the Network Name, Password, and the vCast IP
address shown on the IFP/CDE device(s) home screen.
5. Click OK to complete the pairing of the ViewBoard® Cast
Button and the IFP/CDE device(s) (Figure 3).
6. Remove the ViewBoard® Cast Button and then plug it in
again to start sharing (Figure 4).
Figure 3
Figure 4
3