Publicidad
Idiomas disponibles
Idiomas disponibles
Before performing cleaning, adjusting, repairing and
maintenance work, switch the power tool off and
unplug the power cord. Wait for the blade to stop
completely.
The combined circular saw does not require any additional
lubrication or maintenance. However, you must perform
regular cleaning for a continuous and trouble-free
operation.
Always keep the blade clean and sharp. Properly cared
blades jam less frequently, are more easily controlled, and
allow greater efficiency during operation.
Cleaning
After each use, remove all debris and clean all machine's
parts. Wipe the power tool with a clean, damp cloth or blow
it with low pressure compressed air.
Careful handling protects the power tool and extends its
service life.
Storage
When not in use, store the combined circular saw in a dry,
clean place, free of corrosive smoke and out of children's
reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
