MEGABRAS MD 5060x Manual De Uso página 8

When activated, it allows to program the
Operation Mode (Normal, SVT or TIMER).
When activated, it allows to program the limit of
the "Pass-Fail test".
Turns On/Off the printing of the measured
values on the printer (optional printer).
Increase the value that is being programmed.
Decrease the value that is being programmed.
Starts the test.
Displays the actual voltage applied.
Hold - freeze the last reading on the display.
It displays the calculated value as the result of a
Step Voltage Test (SVT) or Polarization Index
(PI).
It displays the calculated value as the result of a
Dielectric Absorption Index.
End of test.
Indicates Operation
Mode is enabled.
Indicates LIM function
is on.
The printer is on.
Indicates that the test
is being carried out.
Hold function is on.
9
-
-
-
-
-
-