RECARO C 6000 Manual De Montaje página 40

3.5 Fitting the hose/cable harness to the RECARO seat
Important note:
The hose/cable harness must be fitted to the RECARO seat when it is outside the vehicle.
If a hose/cable harness has already been fitted to the seat you should remove it and dispose of it.
Do this by placing the seat on its backrest in order to prevent the panels or the handles from being
damaged.
.
Warning:
During the installation, ensure that the electrical and pneumatic connections do not become
contaminated or damaged, in order to guarantee a secure contact.
H
1
1. First drill two holes in the rail using the drilling template (1) as an aid
I
1
2. Fit the hose/cable harness (1) from the adapter kit to the RECARO seat.
3. Connect up the pneumatic (2) and the electrical (3) connectors.
RECARO Automotive Seating
2
3
1 Drilling template
R0217
1 hose/cable harness
2 Pneumatic connector
3 Electrical connector
K0236
Page 15 of 25