Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Via the Start/Pause-socket, the respective CD-player can be remotely controlled. If you are using a mixer
with Faderstart-function connect the player with the Control Out-socket. Please note that these sockets must
never be connected with any voltage. Please refer to 6.10 Faderstart.
9. DIGITAL OUT-SOCKET
The music-signal of this socket is digital. Connect the output to the respective input of a digital amplifier for
example.
10. AUDIO OUT-SOCKETS
The music-signal of these sockets is analogue. Connect the output to the respective input of your mixer.
11. REMOTE CONTROL
Connect the controller via these plugs. Make sure that you connect the player Unit 1 to the controller Unit 1
and the player Unit 2 to the controller Unit 2.
12. REMOTE SELECT
For selecting the respective connection type for the Faderstart-mixer.
13. AC CONNECTION
4.3 Controller
In order to design this user manual as structured as possible, only one side of the controller is described.
Frontpanel:
1
3
4
5
6
7
8
9
10
11
12
13
14 15 16 17 18 19 20
21
22
23 24 25
26 27 28 29 30
2
1. SECTION UNIT 1
The left part of the controller is designed for controlling the left CD-player (1).
2. SECTION UNIT 2
The right part of the controller is designed for controlling the right CD-player (2).
3. EJECT BUTTON
Via the EJECT-button, you can stop and eject the CD. Please refer to the explanations under 6.2 CD Slot In.
4. SELECT-CONTROL
With the Select-control, you can select the desired effect parameter.
5. ADJUST-CONTROL
With the Ádjust-control, you can adjust the selected effect parameter.
6. TIME-BUTTON
By using the Time-button, the time-indication can be switched from track remain time (Remain) to track
playback time (Elapsed) or total remain time (Total Remain).
Press and hold the Time-button and the CD-player will be stopped.
26/73
10602410_V_1_0.DOC
Publicidad
