Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Explanation of the different abbrevations:
BK/START_T: The period time before starting music
BK/STOP_T: The period time before stopping music
PS/BPM_SYNC: Add the PHASER effect to the music in a cycle based upon the selected beat
PS/GAIN: Determine the volume of PHASER effect signal. The higher ratio with stronger effect.
PS/TIME: Determine the length of PHASER effect. SYNC-OFF, 0.25 sec is the shortest, and 8 sec is
longest; SYNC_ON, 1/4 beat is the shortest and 64 beat is the longest.
FG/BPM_SYNC: Add the FLANGER effect to the music in a cycle based upon the selected beat
FG/GAIN: Determine the volume of FLANGER effect signal. The higher ratio with stronger effect.
FG/TIME: Determine the length of FLANGER effect. SYNC-OFF, 0.25 sec is the shortest, and 8 sec is
longest; SYNC_ON, 1/4 beat is the shortest and 64/1 beats is the longest.
EC/BPM_SYNC: Add the ECHO effect to the music in a cycle based upon the selected beat
EC/GAIN: Determine the volume of ECHO effect signal. The higher ratio with stronger effect.
EC/DELAY_LG: The delay time of ECHO effect. SYNC OFF, 0.01 sec is the shortest, and 4 sec is longest;
SYNC_ON, 1 beat is the shortest and 4/1 beat is the longest.
FL/BPM-SYNC: Add the FILTER effect to the music in a cycle based upon the selected beat
FL/SCAN_TIME (FL/BPM-SYNC:ON): Determine the scanning time of FILTER effect. 1/4 beat is the
shortest and 64/1 beats is the longest
FL/FREQUENCY (FL/BPM-SYNC:OFF): Select the band of frequency. The number increased, the
frequency is close to the treble. The number decrease, the frequency is close to bass.
FL/GAIN: Determine the volume of FILTER effect signal. The higher ratio with stronger effect.
PAN/BPM_SYNC: Add the PAN effect to the music in a cycle based upon the selected beat
PAN/MIX: Determine the volume of signal taken for mixing to the other side.
PAN/PERIOD: Determine the period of PAN effect. SYNC-OFF, 0.06 sec is the shortest, and 4 sec is
Longest: SYNC_ON, 1/64 beat is the shortest and 4/1 beat is the longest.
CP/BPM_SYNC: Add the CHOP effect to the music in a cycle based upon the selected beat
CP/WIDTH: Determine the ratio of auditable music, the higher ratio with more audible signal.
CP/PERIOD: Determine the period of CHOP effect. SYNC-OFF, 0.06 sec is the shortest, and 4 sec is
Longest: SYNC_ON, 1/64 beat is the shortest and 4/1 beat is the longest.
SPL/MIX_VOL: The ratio of SAMPLE single mixing into the music.
SPL/PITCH: To select the sample pitch range from –100% to +100%, 0% means sample playback speed is
Unchanged.
SPL/LOOP_SW: To play the sample music repeatedly
SPL/REVERSE: To play the sample music backward to mix with music.
SPL/INSERT: To cut off the music and insert the sample music.
KEY_SEMITONE: SEMITONE_ON, to change the key by half step, from +12 to –24 key; SEMITONE_OFF,
change the key by percentage from –100% to +100%.
6.13 Operation with SD-card
If you have your SD-card packed with MP3-files, insert the card into the SD-card slot. Press the SD-card
button and start playback from your SD-card.
If you want to download MP3-files from your harddisc to your SD-card, you may use the CMP-3000 as card
writer and the enclosed software for data transmission.
Please note: Never switch the unit off when reading or writing the SD-card!
USB Driver Installation and Operating Instructions
For running program properly, please install the driver before installing the application program.
1. Driver setup
10. There are three directories on installation CD, please select the Driver directory.
11. Run setup.exe and finish installation of the driver.
12. Please press YES to reboot the computer, if operating system is Win98 or Win ME. Please press No to
neglect this step, if operating system is Win 2000 and Win XP.
34/73
10602410_V_1_0.DOC
Publicidad
